How to Fix Waste Ink Pad Counter Problem

Ready to reset your printer, follow the following steps:

All these steps must be done to reset your canon MP198, MP258, MP276, MP496, MP558, MP568, and MP648 printer.

1. Entering into service mode

• Turn off the printer off is the printer power on. And remove the printer USB cable from your computer..
• While the printer is OFF, press and hold the Start/Stop button on the some other canon printers model press Resume/Cancel button.
• While still holding Start/Stop button or Resume/Cancel button, press and hold the POWER button.
• When the POWER LED (green light) lit, release the Start/Stop or resume/cancel button (still holding the POWER button).
• Still holding the power button,   Press the Start/Stop button or resume/cancel button TWICE then Release the POWER button. Wait until LCD printer to display 0 (zero) number
• After the display is 0, attach the printer UDB cable to your computer, its will detected new device installed (its normal), now go to resetting steps

2. Resetting Ink counter on the Printer

• Run “ServiceTool_3200 Ekohasan”. you can download the service tool software from this link: ServiceTool_3200 Ekohasan

• Click “Main button” on Clear ink counter section and select "Main & Platen. 
• Click “0 button” on the Counter Value(%) section.and select "10" then click "Set Button".
• Click "Set Button" on the Clear Ink Counter section. Make sure that Absorber are set to "Main"
• Click "Main Button" on the Clear Ink Counter section and change it to "Platen" then click set
• Then restart the printer.

Note: This original tutorial info is from indoreset. No warranty to all risk caused by this tutorial or the software mentioned on this tutorial because it’s just info.



www.removefloridaarrest.org